當前位置：A組份和B組份打膠機之間具有依附的關系
時間：2018-05-15 來源：http://yfcha.com/ 發布人：昌盛機械
1.A組、B組份膠應保持清潔，嚴防異物進入膠中，由于雙組份密封膠的固化需要一定時間，因此，已涂了雙組份密封膠的玻璃應水平輕輕搬動。
The 1.A and B components should be kept clean and prevent the foreign body from entering the glue. Because the curing of the double component sealant takes a certain time, so the glass coated with the double component sealant should be moved gently.
2.混膠器應經常保持暢通，以保證良好的出膠效果。如遇堵塞情況，可用丙酮浸泡后清洗。建議每5組清洗一次。
2. rubber mixer should be kept smooth to ensure good glue production. In case of blockage, acetone can be soaked and cleaned. It is suggested that every 5 groups be cleaned once.
3.雙組份打膠機在連續工作過程中，膠槍每次停止工作時間一般不得超過20分鐘，否則，應用A組份膠沖出全部混合膠，直至單一的A組份膠從槍口排出為止。
3. in the continuous working process, the glue gun will not stop working more than 20 minutes each time. Otherwise, all the mixed glue is washed out with A component glue until the single A component is discharged from the muzzle.
4.任何因膠體固化所造成的膠槍、管路或整機的故障，一律不在保修范圍之內。
4. any failure of glue gun, pipe or whole machine caused by gel solidification is not within the scope of warranty.
5.高壓膠管不得強行擠壓、彎曲，防止影響系統正常工作。
5. high pressure hose should not be forced to bend or bend to prevent the system from functioning normally.
7.不同雙組份膠生產廠家所生產的膠內含雜質數量不同，根據實際情況清晰B組分的過濾網及單向止回閥，建議每兩組清洗一次。
7. the number of impurities in the rubber produced by the different double component rubber manufacturers is different. According to the actual situation, the filter net and the one-way check valve of the B component are clear. It is suggested that every two groups be cleaned once.
8.當膠槍長時間不用時(超過一周)，應拆下槍體使用溶劑將膠槍和混膠器內的殘留膠體清洗干凈。
8. when the glue gun is not used for a long time (over a week), the gun body should be removed and the residual colloid in the glue gun and rubber mixer should be cleaned with solvents.
9.定期給各泵的加油口加油，應保證油霧器內不斷油。
9. regularly refueling the pumps, ensure that the oil mist is constantly oil.
我們愿以佳的服務意識，迎接八方來客，誠懇與各界朋友精誠合作，共創美好的前程。歡迎大家前來參觀洽談!
We are willing to welcome the eight party guests with the best sense of service, sincerely cooperate with friends from all walks of life at home and abroad, and create a bright future together. Welcome everyone to visit and discuss!
- 全自動鋁條折彎機技術在哪方面提升了 2025/04/19
- 全自動封膠線有什么技術優勢？ 2025/04/18
- 中空玻璃生產線成本高，怎么選性價比高的？ 2025/04/15
- 驗收時才發現玻璃自爆，工期延誤賠償百萬？ 2025/04/14
- 中空玻璃加工設備的講解 2025/04/12
- 毛刷式清洗機怎么使用 2025/04/11
- 中空玻璃加工設備核心是什么？ 2025/04/10
- 全自動鋁條折彎機如何設置更快，讓編程更簡單？ 2025/04/09
- 雙組份打膠機讓膠水發揮最大威力 2025/04/08
- 臥式丁基膠涂布機的優勢有什么 2025/04/07
產品分類Product categories
聯系我們Contact us
- 咨詢熱線：0531-85717458 13705446998
- 公司地址： 山東省德州市齊河安頭鄉企巢工業園
- 掃碼聯系我們：
