批量生產是指在一定時間內同一批生產的機器數量，結構和制造方法完全相同。 批量生產與定制生產之間的大區別之一是，由于內部零件的差異，在客戶使用過程中零件損壞后可能必須制造定制機器。 周期長，這將大大延遲生產過程。 批量生產零件的一致性解決了用戶零件在使用過程中可以立即更換的問題，不僅降低了生產成本，而且節省了生產時間。 天豪的大規模生產有嚴格的維護體系，制造過程帶來了制造的好處，從而節省了成本并提高了生產質量； 檢查過程是預先預測機器問題，及時進行維護和改裝，并確?？蛻舻娜粘＿\(yùn)行。  。
　　Mass production refers to the number of machines produced in the same batch within a certain period of time, with the same structure and manufacturing method. One of the biggest differences between mass production and customized production is that due to the differences in internal parts, customized machines may have to be manufactured after parts are damaged during customer use. Long cycle, which will greatly delay the production process. The consistency of mass production parts solves the problem that user parts can be replaced immediately in the use process, which not only reduces the production cost, but also saves the production time. Tianhao's large-scale production has a strict maintenance system, and the manufacturing process brings manufacturing benefits, thus saving costs and improving production quality; the inspection process is to predict machine problems in advance, timely maintain and modify, and ensure the daily operation of customers.
　　機器完成后，我們將在機器上進行初步測試，以查看硬件的基本功能是否正確，是否有卡紙或聲音是否異常等，然后使用軟件進行調試 機器功能是否符合出廠標準。 此外，檢查人員還將檢查各種指示器，以確保正常使用并點亮； 檢查繼電器和電磁閥等電氣部件，以確保其正常運行； 密封配電箱等必要的地方，以防止客戶隨意拆裝，造成機器故障； 每臺機器的水平測試和負載能力測試。
　　After the completion of the machine, we will conduct preliminary tests on the machine to see whether the basic functions of the hardware are correct, whether there is paper jam or abnormal sound, etc., and then use the software to debug whether the machine functions meet the factory standards. In addition, the inspectors will also check various indicators to ensure normal use and lighting; check electrical components such as relays and solenoid valves to ensure their normal operation; seal the distribution box and other necessary places to prevent customers from disassembling at will, causing machine failure; level test and load capacity test of each machine.

　　完成后，質量管理人員將進行工廠老化測試，以確保機器的長期穩定性，因為某些機器在測試過程中不易出現問題，并且會在48小時甚至72小時后被發現 小時的老化測試操作。 機器運行24小時后，在自動操作過程中檢查位置是否有偏差或是否有異常噪音，并讓機器在同一位置行走三天三夜，以檢查是否存在 確保穩定性的任何問題。 這項工作還旨在找出機器中可能出現的早期問題，為客戶提供穩定的性能，并使客戶放心使用我們的產品，從而大大降低維修率。
　　After completion, the quality management personnel will carry out factory aging test to ensure the long-term stability of the machine, because some machines are not prone to problems during the test process, and will be found to be aging test operation for hours after 48 hours or even 72 hours. After 24 hours of operation, check whether there is deviation or abnormal noise in the position during automatic operation, and let the machine walk in the same position for three days and three nights to check whether there is any problem to ensure stability. This work also aims to find out the possible early problems in the machine, provide customers with stable performance, and make customers feel at ease to use our products, thus greatly reducing the maintenance rate.