當前位置：雙組份打膠機調試注意事項有哪些？
時間：2020-09-15 來源：http://yfcha.com/ 發布人：昌盛機械
為了使雙組份打膠機有一個良好的工作，對不同的產品我們要對雙組分打膠機進行些微的調整，下面小編就給大家總結一下雙組份打膠機調試的注意事項！
In order to make the two-component glue punch have a good working efficiency, we need to make some minor adjustments to the two-component glue punch for different products. The following edition summarizes the matters needing attention in the debugging of the two-component glue punch.
1、在當天機器操作完畢后要把膠管內的膠沖出，防止硬化；如果長時間不實用要注意用煤油清洗膠管和膠槍。
1. After the machine is finished, the glue in the rubber tube should be washed out to prevent hardening. If it is not practical for a long time, we should pay attention to cleaning the rubber tube and gun with kerosene.
2、雙組份打膠機使用的硅酮膠或聚硫膠要注意雜質不能過高，低質量的膠容易堵塞膠管的過濾系統，造成出膠不暢或不均勻。
2. Silicone glue or polysulfide glue used in two-component glue beater should pay attention to the impurities should not be too high, low-quality glue is easy to block the filter system of rubber hose, resulting in poor or uneven glue production.
3、在更換膠的品種時要特別注意把雙組份打膠機內殘留的膠沖凈，好清洗，因為不同品種甚至的膠容易反應堵塞機器。
3. When changing the type of glue, special attention should be paid to rinsing the residual glue in the two-component glue beater, and it is better to clean it, because the glue of different varieties or even brands can easily react to clogging the machine.
4、液壓站系統的壓力，不能調的太高，要根據室內環境溫度等實際情況，調至滿足膠嘴正常出膠均勻打膠即可。打開液壓站時一定要打開膠槍，否則B組份管路壓力將升得很高，造成安全事故。
4. The pressure of hydraulic station system can not be adjusted too high. According to the actual situation of indoor environment temperature, it can be adjusted to meet the normal tapping of rubber nozzles. When opening the hydraulic station, the rubber gun must be opened, otherwise the pressure of component B pipeline will rise very high, resulting in safety accidents.
- 中空玻璃生產線解決：中空玻璃合片總出錯，返工、漏風、粘不牢的難題 2025/12/24
- 合片+充氣+板壓一步到位！中空玻璃生產線效率品質雙飆升 2025/12/23
- 玻璃涂布機設備：丁基膠在涂布過程中產生氣泡的原因分析 2025/12/23
- 中空玻璃生產線的PLC控制系統一鍵操作精準把控生產細節 2025/12/20
- 中空玻璃丁基膠涂布機在打膠中斷膠是怎么回事？如何避免 2025/12/20
- 全自動丁基膠涂布機如何解決漏白和內溢？ 2025/12/19
- 為啥玻璃廠都搶著上大型中空玻璃生產線？4 個核心原因太戳心！ 2025/12/19
- 玻璃廠老板注意！丁基膠涂布機打膠有氣泡？這臺設備徹底解決！ 2025/12/19
- 春節停機別忘保養！中空玻璃加工設備這樣維護，開春開機不趴窩 2025/12/18
- 1分鐘看懂全自動中空玻璃生產線！全程不用人工搬太爽了 2025/12/18
產品分類Product categories
聯系我們Contact us
- 咨詢熱線：0531-85717458 13705446998
- 公司地址： 山東省德州市齊河安頭鄉企巢工業園
- 掃碼聯系我們：
